X500III

X500III

X500III

Embrace the cutting technology from the GCC LaserPro X series designed and engineered for professional use. Packed with several user-friendly features, the GCC LaserPro X500III offers high product performance in terms of both durability and feasibility. The X500III model combines cutting and engraving capabilities to give users a versatile system.

X500III PDF

Product Highlights

RoHS Compliance
All GCC products are RoHS-compliant (the European Parliament Directive 2002/ 95/ EC, Restriction of Hazardous Substances) and lead-free (pb free). GCC will continue to concern and provide environmentally friendly products to protect the earth for our further generation.
Drag-N-Play
The “Drag-N-Play” feature greatly reduces complex set up procedures and allows users to directly drag the lens carriage to the starting point of a job.
Closed-loop DC Servo Technology
DC servo motor applies a higher quality motor and controller to send command to the motors and utilizes an encoder to feedback location values to the controller, so the motors always verify their positions. This continual link allows the motors to run faster with higher acceleration and speed that the laser engraver can cut or engrave and also you can move the laser carriage to any position and resume working precisely. Adopting the servo control technology, GCC LaserPro high speed closed-loop DC servo motor technology guarantees precise and fast carriage movement with exceptionally accurate outputs.
Versatile Engraving and Cutting Capability
X500III delivers high cutting quality with LaserPro’s unique Laser firing control technology. X500III can cut through 20 mm acrylic in a single pass. Better than that, the grayscale technology allows X500III to process 256-level grayscale image with vivid engraving quality.
Pass-through Front to Rear Doors (Optional)
A design with doors on both ends to accommodate extremely long working pieces, front door without the need for a screwdriver.
SmartCENTER™ (Patented)
The super user-friendly SmartCENTER™ function helps end users to easily and automatically locate the center point of objects of any shape vastly eliminating tedious setup time.
SmartACT™ (Patented)
Ground breaking technology that reduces the ramping process and job running time to boost productivity.
Programmable Origin Modes
Easy-to-use multiple position modes allow the operators an effortless way to setup a job with Drag-N- Play. Repetitive workflows can be drastically simplified by relocating the origin position to any desired location.
Intuitive Control Panel Interface
A control panel with coherent hot-key design and graphic icon displays that allows you to directly change the laser parameter setting, set jobs to repeat unlimited times, queue job, delete jobs, and more.
Innovative Windows Driver
LaserPro Windows based driver provides powerful functions, such as SmartCENTER™, Air Assist by Pen, Dithering Patterns and more to reduce set up time and make easy adjustments to achieve marvelous output quality.
Knife-shaped Cutting Table
Unique cutting table with tipped bars that can be easily adjusted without tools to create different levels of working depths. The cutting table of X500III reduces laser reflections and delivers clear cutting edge.
SmartLIGHT
Built-in LED light module illuminates the working space and makes every engraving detail easy to see.
Key Switch & Emergency Stop
Key switch safeguards the machine from unauthorized use. Prominent emergency button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide a safe operating environment.
Job Preview Function
The GCC LaserPro laser engraver all series printer driver features a job preview function that previews graphics before the official laser printing process. One of the highlights of this feature is that it provides an estimated working time*.
The estimated working time is an easy tool for operators to know in advance as how much time will be needed to finish the job for better job management; it is also convenient for a shop to provide a quotation for its laser services.
X500III
Laser Source 80W 100W 130W 150W
Sealed CO2 Laser
Laser Cooling Water Cooled
Working Area w/o honeycomb table 51 x 36 in. (1300 x 916 mm)
with honeycomb table 50.3 x 35.2 in. (1280 x 896 mm)
Max. Part Size
(L x W x H)
w/o Cutting Table 52.9 x 36.0 x 2.1 in. (1346 x 916 x 55 mm)
Doors Open 52.9 x ∞ x 1.1 in. (1346 x ∞ x 30 mm)
with Honeycomb Cutting Table 48.8 x 32.2 x 1.1 in. (1240 x 818 x 30 mm)
with Grid
Cutting Table
 52.1 x 35 x 1.1 in. (1325 x 889 x 30 mm)
Dimensions 74.8 x 55.1 x 47.2 in. (1900 x 1400 x 1200 mm)
Driving Motor Closed-loop DC servo control
Maximum Motor Speed 40 IPS
Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
Engraving Capability 256-level gray scale image processing capability
Distance Accuracy 0.254 mm or 0.1% of move, whichever is greater
Z-Axis Movement Manual
Resolution (DPI) Available 125, 250, 300, 500, 600, 1000
Interface 10 Base-T Ethernet
USB Type-A 2.0  – For USB storage (Max. 32GB capacity, FAT file system)
USB Type-B 2.0  – For connecting with the computer
Focus Lens Standard 2″,Optional 3″ Standard 3″,Optional 2″
Display Panel 4-line LCD panel showing current file name, total working time, laser power, engraving speed, file(s) loaded into memory buffer, setup and diagnostic menus.
Safety Class I Laser Product Compliant with EN60825
Class II Laser Product Compliant with CDRH
2006/42/EC Machinery Directive Compliance
Class 4 Laser Product Compliant with CDRH with the optional pass-through door module
Cutting Table Knife-shaped cutting bars with down vacuum and scrap collecting funnel
Facility Requirements
Operation Voltage 200-240VAC, 50/60Hz auto switching, Max.10A
Fume Extraction System External exhaust system with minimum flow rate 2160m3/h (CFM 1273 ft3/h) is required,2.5kPA negative pressure (Pure-Air PA-2400FS @ 8″ exhaust port)
Trebate pomoć? Kontaktirajte nas!